Mechanical properties of an additive manufactured CF-PLA/ABS hybrid composite sheet

Journal
Ahmed, Syed Waqar and Hussain, Ghulam and Al-Ghamdi, Khalid A and Altaf, Khurram
Journal of Thermoplastic Composite Materials: 0892705719869407, 2019
Publication year: 2019

Influence of tool material, tool geometry, process parameters, stacking sequence, and heat sink on producing sound Al/Cu lap joints through friction stir welding

Journal
Wei, Hongyu and Latif, Abdul and Hussain, Ghulam and Heidarshenas, Behzad and Altaf, Khurram
Metals, 9(8): 875, 2019
Publication year: 2019

Experimental and numerical characterization of mechanical properties of carbon/jute fabric reinforced epoxy hybrid composites

Journal
Ali, Aakash and Nasir, Muhammad Ali and Khalid, Muhammad Yasir and Nauman, Saad and Shaker, Khubab and Khushnood, Shahab and Altaf, Khurram and Zeeshan, Muhammad and Hussain, Azhar
Journal of Mechanical Science and Technology, 33(9): 4217—4226, 2019
Publication year: 2019

Binder removal by a two-stage debinding process for powder injection molding Fe–50Ni alloy parts

Journal
Ali, Muhammad and Ahmad, Faiz and Melor, Puteri Sri and Yahya, Noorhana and Altaf, Khurram and Omar, Mohd Afian and Aslam, Muhammad
Materials Research Express, 6(8): 0865e3, 2019
Publication year: 2019

Rapid Prototyping of a Customized Cooling System for a Novel Crank Rocker Engine

Journal
Altaf, Khurram and Baharom, Masri and Aziz, A Rashid A and Qayyum, Junaid A and Jahanzaib, Mirza
International Journal of Engineering & Technology, 7(3.17): 90—93, 2018
Publication year: 2018

Performance analysis of enhanced 3D printed polymer molds for metal injection molding process

Journal
Altaf, Khurram and Qayyum, Junaid and Rani, A and Ahmad, Faiz and Megat-Yusoff, Puteri and Baharom, Masri and Aziz, A and Jahanzaib, Mirza and German, Randall
Metals, 8(6): 433, 2018
Publication year: 2018

Experimental and Numerical Investigation of Six-Bar Linkage Application to Bellow Globe Valve for Compact Design

Journal
Azam, Farooq and Abdul Rani, Ahmad and Altaf, Khurram and Zaharin, Haizum
Applied Sciences, 8(10): 1980, 2018
Publication year: 2018

Enhanced polymer rapid tooling for metal injection moulding process

Journal
Altaf, Khurram and Rani, Abdul and Majdi, Ahmad and Ahmad, Faiz and Ahmad, Junaid
{journal}, 2018
Publication year: 2018

Additive Manufacturing: A way forward transition from Conventional to Advanced Manufacturing Technology

Journal
Alia, Sadaqat and Rani, Ahmad Majdi A and Altaf, Khurram and Azeez, Abdul and Baige, Zeeshan
International Journal of Pure and Applied Mathematics, 118(24), 2018
Publication year: 2018

PERFORMANCE OF 3D PRINTED POLYMER MOLD FOR METAL INJECTION MOLDING PROCESS

Journal
Qayyum, Junaid A and Altaf, Khurram and Rani, Ahmad Majdi Abdul and Ahmad, Faiz and Jahanzaib, Mirza
{journal}, 2017
Publication year: 2017

OPTIMUM BUILD ORIENTATION OF3D PRINTED PARTS FOR A ROBOT GRIPPER

Journal
Altaf, Khurram and Zulkarnain, Ahmad Fahim and Qayyum, Junaid A and Jahanzaib, Mirza
{journal}, 2017
Publication year: 2017

Additive manufacturing design of globe valve for optimized flow

Journal
Azam, Farooq I and Rani, Ahmad Majdi Abdul and Altaf, Khurram and Zaharin, Haizum Aimi
Transactions of the Canadian Society for Mechanical Engineering, 41(5): 717—723, 2017
Publication year: 2017

Rapid Tooling For Powder Injection Moulding Process

Journal
Altaf, Khurram and Rani, Ahmad Majdi Abdul and Ahmad, Faiz and Aslam, Muhammad
{journal}, 2016
Publication year: 2016

Powder injection molding of biocompatible stainless steel biodevices

Journal
Aslam, Muhammad and Ahmad, Faiz and Yusoff, Puteri Sri Melor Binti Megat and Altaf, Khurram and Omar, Mohd Afian and German, Randall M
Powder Technology, 295: 84—95, 2016
Publication year: 2016

LOW PRESSURE INJECTION MOLDING OF BORON ADMIXED 316L STAINLESS STEEL FOR ENGINEERING APPLICATIONS

Journal
Aslam, Muhammad and Ahmad, Faiz and Yusoff, Puteri Sri Melor Binti Megat and Altaf, Khurram and Omar, Mohd Afian and Raza, M Rafi
{journal}, 2016
Publication year: 2016

Investigation of rheological behavior of low pressure injection molded stainless steel feedstocks

Journal
Aslam, Muhammad and Ahmad, Faiz and Yusoff, Puteri Sri Melor Binti Megat and Altaf, Khurram and Omar, Mohd Afian and Abdul Khalil, HPS and Raza, M Rafi
Advances in Materials Science and Engineering, 2016, 2016
Publication year: 2016

GRAPHENE NANOPLATELETS (GNPS) EXFOLIATION AND DISPERSION IN METAL POWDER USING DIFFERENT SOLVENTS

Journal
Baig, Zeeshan and Mamat, Othman and Mustapha, Mazli and Altaf, Khurram and Mailabari, Raphael Joshua
{journal}, 2016
Publication year: 2016

GRAIN REFINEMENT OF LM25 ALUMINUM ALLOY CASTING USING SLOPING PLATE PROCESS

Journal
Qayyum, Junaid Ahmad and Altaf, Khurram and Mahmood, Adnan and Shah, Masood and Rani, A Majdi A
{journal}, 2016
Publication year: 2016

Determining the effects of thermal conductivity on epoxy molds using profiled cooling channels with metal inserts

Journal
Altaf, Khurram and Rani, Ahmad Majdi Abdul and Ahmad, Faiz and Baharom, Masri and Raghavan, Vijay R
Journal of Mechanical Science and Technology, 30(11): 4901—4907, 2016
Publication year: 2016

APPLICATION OF ADDITIVE MANUFACTURING/3D PRINTING TECHNOLOGIES AND INVESTMENT CASTING FOR PROTOTYPE DEVELOPMENT OF POLYCRYSTALLINE DIAMOND COMPACT (PDC) DRILL BIT BODY

Journal
Altaf, Khurram and Rani, Ahmad Majdi Abdul and Woldemichael, Dereje E and Lemma, Tamiru A and Zhi, Chou
{journal}, 2016
Publication year: 2016

Numerical study of profiled conformal cooling channels for cooling time reduction in injection mould tools

Journal
Altaf, Khurram and Rani, Ahmad Majdi bin Abdul
International Journal of Engineering Systems Modelling and Simulation, 7(4): 230—237, 2015
Publication year: 2015

Prototype production and experimental analysis for circular and profiled conformal cooling channels in aluminium filled epoxy injection mould tools

Journal
Altaf, Khurram and Rani, Ahmad Majdi Abdul and Raghavan, Vijay R
Rapid Prototyping Journal, 2013
Publication year: 2013

Comparative thermal analysis of circular and profiled cooling channels for injection mold tools

Journal
Altaf, Khurram and Raghavan, VR and Rani, AMA
Journal of Applied Sciences, 11(11): 2068—2071, 2011
Publication year: 2011

Study of Heat Transfer Attributes of Custom Fins for Crank-Rocker Engine Block using ANSYS

Journal
Tariq, Adeel and Altaf, Khurram and Rani, Ahmad Majdi Abdul and Baharom, Masri and Aziz, Abd Rashid Abd
{journal}, {year}
Publication year: 1000